Rotax has published Service Bulletins SB-2026-003 and SB_A-2026-003, which allow an optional extension of the time between overhauls (TBO) for the Rotax 915 iS and 915 iSc from 1,200 to 2,000 hours. For owners and flight schools flying a Bristell with the Rotax 915, this can noticeably lower the cost of every flight hour.
What changed
Until now, every Rotax 915 had to go through a general overhaul after 1,200 hours. Eligible engines can now stay in service up to 2,000 hours. That is 800 more hours, an increase of two thirds, with no new parts, no change in weight and no software update required.
Why it matters
Most operators set aside a fixed reserve per flight hour to cover the engine overhaul. When the same overhaul cost is spread over 2,000 hours instead of 1,200, that reserve drops by 40 %. For a private owner it means lower cost per hour. For a flight school flying several hundred hours a year, it means fewer engine downtimes and a better operating budget.
A documented 2,000-hour engine also supports the resale value of the aircraft, because the next owner gets more usable engine life.
Which engines qualify
The extension applies to engines from these serial numbers:
- Rotax 915 iSc A (certified): from S/N 10006805
- Rotax 915 iSc C24 (certified): from S/N 10012483
- Rotax 915 iS A (ASTM): from S/N 10006742
- Rotax 915 iS C24 (ASTM): from S/N 10010510
Engines with lower serial numbers keep the standard TBO of 1,200 hours.
Three conditions, from hour zero
The extended TBO is available only if the engine has met all three conditions since its very first hour of operation:
- Oil: XPS AIRCRAFT 5W50 used throughout the entire life of the engine.
- Temperature: oil temperature never above 120 °C since entry into service.
- Maintenance: carried out according to the approved maintenance instructions.
If any of these conditions was not met from hour zero, the standard 1,200-hour TBO applies. That is why documentation matters: keep the oil type recorded in the engine logbook with every oil change.
What it means for Bristell aircraft
New Bristell aircraft come with eligible Rotax 915 engines, so we now list the TBO as 2,000 hours in our specifications. To keep it, operate the engine within the three conditions above from day one. For aircraft already in service, eligibility depends on the engine serial number and its operating history, and your Bristell dealer or service center can confirm it.
What to do now
- Check your engine serial number in the engine logbook.
- Confirm that XPS AIRCRAFT 5W50 oil has been used since hour zero and that the records are complete.
- Contact your Bristell dealer or service center to confirm eligibility and update your maintenance planning.
Quick answers
Is the extension mandatory? No. It is optional. Engines can stay on the 1,200-hour schedule.
Can an older engine be upgraded? No. Eligibility depends on the engine serial number.
I switched to XPS 5W50 later. Does it count? No. The oil must be used from hour zero, otherwise 1,200 hours apply.
Does the engine need any modification? No. No parts, no weight change and no software change are required.
Source: Rotax SB-2026-003 (915 iSc) and SB_A-2026-003 (915 iS), available at flyrotax.com. Questions about your aircraft? Contact your Bristell dealer.














